11/17/2026

Guide to selecting high-pressure pumps for desalination systems

 

In desalination systems, the high-pressure pump is the component that makes the entire process possible: it is the pump that forces salt or brackish water through the reverse osmosis membranes, turning it into fresh water. Precisely because it works in continuous contact with salt-rich water and at high pressures, it must have very specific design characteristics. In this guide we look at how the pump works within a desalination system, what requirements it must meet, why stainless steel is the reference material for corrosion resistance, and which Hawk solutions are best suited. We close with a practical answer to the question designers and installers ask themselves: how do you choose a pump for desalination systems?

The role of the high-pressure pump in desalination

Reverse osmosis desalination requires high pressure to overcome the natural osmotic pressure of salt or contaminated water and to force the water through the membrane. The pressure required varies according to the salinity level: the more saline the water, the higher the pressure needed. The pump is also responsible for ensuring a constant, uniform flow towards the membrane — an essential condition both for optimising filtration and for preventing damage to the membrane itself.

From this standpoint, choosing the pump is not a minor detail: it directly affects the system’s efficiency, energy consumption and membrane life. On the Hawk website, the application dedicated to reverse osmosis brings together the pumps designed to operate under pressure even with salt water, thanks to construction materials selected to last over time.

The features a watermaker pump must have

A desalination system is a demanding working environment: saline water, prolonged operation and the need for stable performance. The high-pressure pumps intended for this application must therefore meet a few essential requirements:

  • - Corrosion resistance: seawater is aggressive, so the components in contact with the fluid must be made from materials that resist corrosive agents, such as stainless steel.
  • - Adequate pressure and flow rate: the pump must be sized to deliver the pressure and flow rate required by the system; insufficient pressure compromises the efficiency of the process.
  • - Constant flow to protect the membrane: maintaining the correct pressure and a uniform supply prevents damage to the membrane and ensures the required level of purification.

 

Why stainless steel makes the difference

Among all the requirements, corrosion resistance is the one that most often determines the choice. Saline water attacks common metals and, over time, compromises their integrity: this is why, in desalination, stainless steel is the reference material for the parts in contact with the fluid. Hawk addresses this with the Stainless Steel Chemical versions of its piston pumps, identified by the ESA designation.

The strength of these versions is that AISI 316L stainless steel is not limited to the head, but also extends to the valves and the internal metal components in contact with the water. Added to this are special gaskets and seals, suited to use with aggressive chemical agents and salt water, and a coated body that provides extra protection against external attack. It is a combination aimed squarely at durability: less corrosion of the critical parts means more stable performance and a longer service life for the system.

The same 316L stainless steel architecture is available across several platforms, covering both low and high flow rates. For systems that require large volumes of water, the MXT series is the high-flow choice in the range: in its MXT Stainless Steel Chemical version it combines 316L stainless steel construction with the ability to handle the substantial flow rates typical of the MXT platform.

How to choose a pump for desalination systems?

The choice always starts from the system data and proceeds step by step. First, the design pressure and flow rate are defined: the pressure depends on the salinity of the water to be treated, the flow rate on the volume of water the membranes must receive. Once the operating range has been identified, the next step is the materials: when treating salt water, the 316L stainless steel construction of the parts in contact with the fluid, head, valves and internal components, as in the ESA versions is the most solid guarantee against corrosion.

Next, consider the compatibility with any chemical agents used in the cleaning and pre-treatment cycles, the durability expected relative to the operating hours, and the ease of maintenance, which is particularly important on board. In short: the pump is sized on real pressure and flow rate, stainless steel is chosen for saline water, and reliability and maintainability are prioritised. In marine settings, where these criteria are even more stringent, our guide to pumps for the marine industry may be useful.

The best Hawk solutions for desalination

The table below summarises the Hawk series best suited to reverse osmosis systems, with the declared pressure and temperature values and the materials in contact with the water. The ESA versions in 316L stainless steel are the reference for salt water.

Series Maximum pressure Max water temperature Parts in contact with water Recommended use
NMT Stainless Steel Chemical (NMT-ESA) 200 bar 85 °C Head, valves and internal components in 316L stainless steel Reverse osmosis with aggressive chemical agents and salt water
MXT Stainless Steel Chemical (MXT-ESA) 150 bar 85 °C Head, valves and internal components in 316L stainless steel High-flow reverse osmosis, food and chemical sectors

 

With the same 316L stainless steel construction logic, the choice between the series depends on the design flow rate. The NMT-ESA is the reference for lower-flow systems working with aggressive chemical agents and salt water, while the MXT-ESA extends the same stainless steel architecture to high-flow systems, including in the food and chemical sectors. In both cases the advantage is not only the stainless steel head, but the extension of 316L to the valves and internal components in contact with the fluid, combined with gaskets and seals compatible with the cleaning cycles.

How to choose a pump for desalination systems

In conclusion, the pump for a desalination system is always chosen by starting from the real data of the system and proceeding by priority. First, the design pressure and flow rate are defined: the pressure depends on the salinity of the water to be treated, the flow rate on the volume the membranes must receive. Once the operating range has been identified, the material becomes the decisive criterion: with salt water, the 316L stainless steel construction of the parts in contact with the fluid, head, valves and internal components, as in the ESA versions is the most solid guarantee against corrosion and, therefore, against the decline of performance over time.

Finally, chemical compatibility, the expected durability relative to operating hours and ease of maintenance are assessed. By sizing the pump on actual pressure and flow rate, choosing stainless steel for saline water and selecting a Hawk platform suited to the required flow rate, from the NMT-ESA to the MXT-ESA, the pump becomes a factor of reliability for the entire system, with more stable consumption and a longer service life for the membranes.


Search by Product.

Scroll through the complete list of Hawk pumps available, or enter the name of the model to see all search results.

Search byApplications.

Hawk pumps are used for an endless range of applications. Click on the application that best meets your needs and view all the results available.

Search by Pressure and Flow rate.

Want to search for a Hawk pump based on technical characteristics? Enter a value for the pressure and/or flow rate. A list of Hawk pumps that meet all your parameters will be displayed.